9 Best Mattress Toppers for Back Sleepers (November 2026)
The best mattress toppers for back sleepers include the COONP Queen Mattress Topper for soft cotton pillow top feel, the HYLEORY Queen Size Mattress Topper Viscose Made for hot sleepers who sleep on their backs, and the DOWNCOOL 5 Inch Cooling Queen Mattress Topper for thick 5 inch cooling foam.
On this page (9 sections)
- The best mattress toppers for back sleepers, ranked by score
- Comparison
- How we compared these toppers for back sleepers
- What firmness should a back sleeper choose?
- Should back sleepers pick memory foam or fiber fill?
- How do cooling fabrics help hot back sleepers?
- What pocket depth and size should you measure?
- How do you set up and care for a topper?
- Which topper should you buy for back sleepers?
The best mattress toppers for back sleepers are the COONP Queen Mattress Topper and the HYLEORY Queen Size Mattress Topper Viscose Made, because both add soft, breathable cushion while keeping a flat sleeping surface.
Back sleepers usually need support to keep hips aligned, plus enough give to ease pressure.
That balance is trickier than it sounds.
A mattress that feels firm on its own can leave the curve under your lower back unsupported.
A topper that is too soft can let your hips sink and change how your spine lines up through the night.
The two picks above score well because they soften the surface without turning the bed into a deep cradle.
COONP brings a cotton pillow top feel that suits readers who want breathability.
HYLEORY brings bamboo viscose fabric that suits readers who run warm.
Both use a deep pocket to hold the pad in place.
That matters for back sleepers who turn over and do not want to wake to a shifted topper.
Our score weighs specs, features and buyer feedback for that match.
Firmness, fabric, pocket fit and care ease all matter because a good feel on night one still needs to work after washing and remaking the bed.
Use this guide to match your current mattress and sleep habits to the right texture.
If your bed feels very firm, a soft pillow top may be enough.
If your bed already feels soft or sags in the middle, a thinner or firmer layer may suit you better.
Our picks at a glance
-
1
-
2
Best for hot sleepers who sleep on their backsHYLEORY Queen Size Mattress Topper Viscose Made
9.7/10 our score
See it on Amazon -
3
Best for thick 5 inch cooling foamDOWNCOOL 5 Inch Cooling Queen Mattress Topper
9.6/10 our score
See it on Amazon
- 4
Check itWhatsBedding 4 Inch Memory Foam Mattress Topper
Best for gel memory foam support - 5
Check itNiagara Sleep Solution Queen Ultra Soft Mattress
Best for ultra soft plush comfort - 6
Best for down alternative fillCheck it - 7
Check itMASVIS Queen Size Dual Layer 4 Inch
Best for adjustable dual layer foam - 8
Best for bamboo rayon softnessCheck it - 9
Check itSINWEEK 3 Inch Gel Memory Foam Mattress
Best for certified gel foam topper
The best mattress toppers for back sleepers, ranked by score
The top picks favor breathable pillow tops with deep pockets. Foam picks follow for readers who want more contouring.
COONP Queen Mattress Topper: Best for soft cotton pillow top feel
- 100% cotton top with polyester back and skirt
- Extra thick overfilled pillow top
- Elastic deep pocket fits 8-21 in
- Machine washable
- 400 thread count
A soft, breathable cotton pillow top that suits back sleepers who want cushion without a foam slab feel.
Pros
- Cotton top for breathability
- Deep pocket for thick mattresses
- Machine washable
Cons
- Soft feel may be too plush for some
- Heart: not water resistant
COONP suits back sleepers who want a soft cotton surface instead of a foam slab. Its 100% cotton top feels breathable and smooth in warm weather.
The overfilled pillow top spreads weight evenly, which can ease pressure under the lower back and hips. It lists side, back and stomach sleepers as suitable, which helps if you change position at night.
The elastic deep pocket fits 8 to 21 inches, so it covers thin and thick beds without straps. The queen size is 60 by 80 inches, and a 400 thread count top gives a smoother hand feel than low count polyester pads.
Machine wash care is simple. Shake and pat after unpacking, then tumble dry on low for 20 minutes to restore loft.
The trade-off is a soft feel that may be too plush on an already soft mattress. It is also not water resistant, so use a waterproof protector below it for spills and sweat.
HYLEORY Queen Size Mattress Topper Viscose Made: Best for hot sleepers who sleep on their backs
- 60% polyester and 40% viscose made from bamboo
- Extra thick quilted pillow top
- Deep pocket fits 6-18 in, also described to 21 in
- Machine washable gentle cycle
- OEKO-TEX certified
A bamboo viscose pillow top aimed at hot back sleepers who want moisture wicking and a secure skirt.
Pros
- Bamboo viscose fabric for airflow
- Deep pocket skirt
- Machine washable and dryer safe
Cons
- Soft quilted feel may not suit firm lovers
- Green color may not match every set
HYLEORY suits hot back sleepers who want cooling fabric and pillow top softness. Its viscose made from bamboo fabric is described as silky, breathable and moisture wicking.
The blend is 60 percent polyester and 40 percent viscose made from bamboo, so polyester adds durability while bamboo derived fiber gives a smooth touch. The product is free of latex and formaldehyde, and carries OEKO-TEX certification.
The quilted pillow top cushions hips and shoulders while the deep pocket skirt holds mattresses up to 18 inches deep. HYLEORY also notes use on memory foam, pillow top and adjustable bases.
One bullet also mentions up to 21 inches, so check your exact depth before relying on that higher figure. The green color sets it apart from white and gray picks.
Machine wash on gentle and tumble dry low. The trade-off is a soft quilted feel that may not match a firm preference.
Compare fiber and foam in our mattress topper comparison.
DOWNCOOL 5 Inch Cooling Queen Mattress Topper: Best for thick 5 inch cooling foam
- 5 inch thickness
- Gel memory foam plus blended memory foam layers
- 21% bamboo derived viscose, 21% polyethylene cooling fiber, 58% polyester air layer
- 21 in deep pocket elastic skirt
- OEKO-TEX certified
- Hand wash only
A thick cooling foam topper that adds cushion while keeping a supportive feel for back sleepers.
Pros
- 5 in foam for pressure relief
- Cooling fiber surface
- Full edge elastic skirt
Cons
- Hand wash only
- Thickest option here, raises bed height
DOWNCOOL suits back sleepers who want thick foam support with a cooling surface. At 5 inches thick, it is the thickest foam pick here.
That height can soften a very firm mattress and help fill the gap under the lower back. It is marketed for side, back and stomach sleepers, aiming for a middle ground rather than a single position.
Inside are a gel memory foam layer plus a blended layer of regular memory foam and 3D slow recovery foam, listed as 60 percent and 40 percent. That mix aims to balance softness with support so you sink less than with a single soft foam slab.
The surface blends 21 percent bamboo derived viscose, 21 percent polyethylene cooling fiber and 58 percent polyester air layer fabric, with a waffle weave said to boost air circulation.
The 21 inch skirt wraps thick mattresses and helps prevent sliding. Care is hand wash only, a clear trade-off against machine washable fiber tops.
If heat is your issue, also read Can You Put a Topper on a Memory Foam Mattress?.
WhatsBedding 4 Inch Memory Foam Mattress Topper: Best for gel memory foam support
- 4 in thick, 80 x 60 x 4 in
- Gel memory foam with shredded memory foam
- Dot quilting to keep fill even
- 4 elastic straps
- Spot clean only
A 4 inch gel foam topper that balances softness and support for back sleepers who like foam contouring.
Pros
- Gel foam for breathable surface
- Quilting helps prevent lumps
- Straps keep it in place
Cons
- Spot clean only
- Foam can sleep warm for some
WhatsBedding suits back sleepers who like gel foam contouring. Its 4 inch gel memory foam combines softness with shredded memory foam support.
That blend can relieve pressure while keeping the surface breathable. The full size is 80 by 60 by 4 inches, so you can plan sheet depth and bed height clearly.
Dot quilting helps keep fill evenly distributed and limits lumps over time. The fabric type is listed as 100 percent polyurethane foam, meaning the foam itself is the comfort layer rather than a loose fiber pad.
Four elastic straps anchor it so it stays in place when you turn over. Straps need checking after washing or bed making.
The cover is spot clean only, so spills need prompt attention. It arrives vacuum compressed and needs about 24 hours to fluff after patting flat.
For context, see Are Memory Foam Mattresses Bad for Your Back? The Facts.
Niagara Sleep Solution Queen Ultra Soft Mattress: Best for ultra soft plush comfort
- 40% rayon derived from bamboo top
- Fits 8-20 in deep mattresses
- 60 x 80 in queen size
- Machine washable
- Deep pocket, non slip
An ultra soft bamboo rayon topper for back sleepers who want a plush, sweat absorbent surface.
Pros
- Bamboo rayon top
- Deep pocket for thick mattresses
- Machine washable
Cons
- Plush feel may be too soft for firm preference
- Dark gray color
Niagara Sleep Solution suits back sleepers who want an ultra soft, plush surface. Its top blends 40% rayon derived from bamboo with polyester for a gentle, sweat absorbent feel.
The full top blend is 60 percent polyester and 40 percent rayon derived from bamboo, with a polyester bottom and skirt. That mix suits sensitive skin and heat, since bamboo derived rayon feels silky.
The deep pocket fits 8 to 20 inches, covering most queen beds with or without a protector. At 60 by 80 inches it matches a standard queen.
Listed features include deep pocket, noiseless, non slip, pillow top and washable. For back sleepers, a non slip design matters because a plush top that shifts can change support through the night.
Machine wash care makes refresh easy. After unpacking, shake and pat, then leave 48 hours or tumble dry on low for 20 minutes.
The trade-off is firmness: plush may feel too soft if your mattress already sags or you prefer firmer support.
SameBed Mattress Topper Queen: Best for down alternative fill
- Down alternative filling
- Microfiber fabric, 400TC combed fiber
- Box quilted design
- Fits 8-21 in mattresses
- Machine wash, tumble dry low
An extra plush down alternative pad that cushions pressure points for back sleepers who prefer fiber fill.
Pros
- Box quilting keeps fill in place
- Deep pocket 8-21 in
- Machine washable
Cons
- Extra plush may lack support for some
- 2 in listed dimensions are thinner than foam picks
SameBed suits back sleepers who prefer down alternative fill over foam.
Its box quilted design holds 5D and 7D snow down alternative filling in separate boxes.
Each box acts like a small pillow, limiting shifting and keeping cushion even from shoulder to hip for back sleepers.
That structure helps when a plain loose fill can bunch toward the sides over time.
The microfiber fabric uses 400TC combed fiber for a soft, skin friendly feel, with a square jacquard surface for texture.
The 360 degree stretch skirt fits 8 to 21 inch mattresses and stays in place during tossing and turning.
Listed dimensions are 80 by 60 by 2 inches, with a weight of 2000 grams, signalling substantial fiber fill.
For daily use, that thinner profile keeps total bed height low, which can help if your fitted sheets already sit snugly.
Machine wash at low temperature and tumble dry low, with no ironing or dry cleaning listed.
A short tumble dry on low before first use can help the fill look fuller after storage.
The trade-off is extra plush firmness, which may lack support for back sleepers who need a firmer base.
If your mattress is already soft, test the feel before relying on it for long term comfort.
MASVIS Queen Size Dual Layer 4 Inch: Best for adjustable dual layer foam
- 2 in cooling gel memory foam plus 2 in pillow top pad
- 4 in combined thickness
- Medium firmness
- 400TC combed fiber
- Machine wash separately in cold water
A two piece dual layer topper that lets back sleepers use gel foam, the pillow top, or both.
Pros
- Adjustable two layer design
- Medium firmness suits many back sleepers
- Cooling gel layer
Cons
- Two pieces need more setup
- Wash pieces separately
MASVIS suits back sleepers who want to adjust firmness by layer. It combines a 2 inch cooling gel memory foam layer with a 2 inch quilted pillow top pad, making 4 inches together.
The pillow top uses snow down alternative overfilling with 3D and 7D fiber, said to circulate air and reduce heat compared with a plain foam slab.
You can use one layer alone for a thinner feel. That flexibility helps if you are unsure whether foam or fiber will suit your back best.
Medium firmness is a common starting point for back sleepers who want support with give, and the foam layer is described as medium firm while the quilted pad adds a softer top.
The 400TC combed fiber surface is durable and machine washable separately in cold water, with tumble dry on low or line dry. Setup takes longer than a single pad because the foam needs 48 to 72 hours in a ventilated area.
That trade-off buys control over feel, but adds layers to align.
BEDLORE Queen Mattress Topper: Best for bamboo rayon softness
- 40% rayon made from bamboo, 60% polyester knit
- 100% polyester filling
- Fits 6-18 in mattresses
- Machine washable
- 2 in thick after expansion
A soft bamboo rayon pillow top for back sleepers who want gentle cushion and easy washing.
Pros
- Bamboo rayon fabric
- Deep elastic pocket
- Machine washable
Cons
- Only 2 in thick after expansion
- Soft feel may not add much support
BEDLORE suits back sleepers who want a simple bamboo rayon pillow top. Its fabric blends 40% rayon made from bamboo with polyester knit for a breathable, soft touch.
The full listing is 40 percent rayon made from bamboo and 60 percent polyester knit, with 100 percent polyester filling and bottom. That gives a smooth top over familiar polyester fill.
The deep elastic pocket fits 6 to 18 inch mattresses and helps prevent shifting. For back sleepers, a secure skirt matters because a soft top that bunches can half cushion and half support in uneven spots.
The dark gray color may hide marks better than white cotton tops.
At 2 inches thick after expansion, it adds less height than foam picks, so it suits low clearance beds and snug fitted sheets. It ships vacuum compressed, so allow 48 hours to expand or 20 minutes on low tumble dry.
Machine wash care is practical, and the trade-off is less pressure relief than 3 to 5 inch foam.
SINWEEK 3 Inch Gel Memory Foam Mattress: Best for certified gel foam topper
- 3 in gel memory foam
- Removable soft cover with zipper
- Anti slip backing and elastic straps
- CertiPUR-US certified foam, OEKO-TEX cover
- Machine washable cover
A 3 inch gel foam topper with a removable cover for back sleepers who want foam support and easy cleaning.
Pros
- CertiPUR-US certified foam
- Removable washable cover
- Anti slip backing
Cons
- Not for standalone use
- Needs 48-72 hours to expand
SINWEEK suits back sleepers who want gel foam with a removable cover. Its 3 inch gel memory foam conforms to body curves and distributes weight to ease pressure points.
At 3 inches it sits between 4 and 5 inch foam picks and 2 inch fiber tops, adding cushion without raising the bed too much.
The soft cover zips off for machine washing, which is easier than cleaning a fixed foam cover. Elastic straps and anti slip backing help keep it stable, and the cover uses skin friendly polyester fiber with a premium metal zipper.
That separates cover cleaning from foam care, which helps with sweat and spills.
SINWEEK foam is CertiPUR-US certified and the cover is OEKO-TEX certified. It is not for standalone use, so you still need a mattress below it.
Allow 48 to 72 hours in a ventilated area to expand. The trade-off is a thinner foam layer, so pair it with a supportive mattress.
Comparison
| Product | Best for | Size | Firmness | Fabric | Our score |
|---|---|---|---|---|---|
| COONP Queen Mattress Topper | soft cotton pillow top feel | Queen 60 x 80 in | Soft | 100% Cotton top | 9.7 |
| HYLEORY Queen Size Mattress Topper Viscose Made | hot sleepers who sleep on their backs | Queen | 60% Polyester, 40% Viscose Made from Bamboo | 9.7 | |
| DOWNCOOL 5 Inch Cooling Queen Mattress Topper | thick 5 inch cooling foam | Queen | 9.6 | ||
| WhatsBedding 4 Inch Memory Foam Mattress Topper | gel memory foam support | 80 x 60 x 4 in | 9.5 | ||
| Niagara Sleep Solution Queen Ultra Soft Mattress | ultra soft plush comfort | 60 x 80 in | Plush | 9.3 | |
| SameBed Mattress Topper Queen | down alternative fill | Queen 80 x 60 x 2 in | Extra Plush | 8.9 | |
| MASVIS Queen Size Dual Layer 4 Inch | adjustable dual layer foam | Queen | Medium | 8.6 | |
| BEDLORE Queen Mattress Topper | bamboo rayon softness | Queen | 8.4 | ||
| SINWEEK 3 Inch Gel Memory Foam Mattress | certified gel foam topper | Queen | 8.2 |
The main split is fiber pillow tops versus gel foam. Fiber tops feel softer and more breathable, while foam tops contour more and add thicker support.
| Pick | Thickness | Feel | Care |
|---|---|---|---|
| COONP | Pillow top | Soft | Machine wash |
| HYLEORY | Pillow top | Soft | Machine wash gentle |
| DOWNCOOL | 5 in | Soft foam | Hand wash only |
| WhatsBedding | 4 in | Soft foam | Spot clean only |
| Niagara | Pillow top | Plush | Machine wash |
| SameBed | 2 in listed | Extra plush | Machine wash |
| MASVIS | 4 in combined | Medium | Machine wash pieces |
| BEDLORE | 2 in expanded | Soft | Machine wash |
| SINWEEK | 3 in | Soft foam | Wash cover |
How to read the table for back support
Thickness alone does not tell you much, because a 5 inch foam topper and a plush fiber topper feel very different. Foam tends to hold shape under your hips, while fiber compresses and rebounds more loosely.
Care matters almost as much as feel. A machine washable fiber top can be refreshed regularly, while spot clean or hand wash models need more effort.
A removable cover like SINWEEK also simplifies routine cleaning.
Measure your mattress plus any protector, then compare that total with the listed pocket range. Deep skirts here cover up to 18, 20 or 21 inches, while strap models rely on corner anchors.
How we compared these toppers for back sleepers
We compared specs, features and buyer feedback against back sleeper needs. Flat support, pressure relief, heat control and pocket fit came first.
We did not test these products hands on.
What we weighted most
Firmness and feel came first, because back sleepers are sensitive to hips sinking too low. Medium and medium soft are the most versatile starting points for a firm mattress.
Soft and plush fiber tops scored well when they paired cushion with a deep pocket and easy washing.
Fabric and heat control came next, since warm sleepers often blame the topper for trapped heat. Cotton, bamboo viscose, rayon from bamboo and gel foam each handle heat differently.
We did not overvalue cooling language alone, because no fabric replaces good airflow in the room.
Fit and care formed the last filter. A 21 inch skirt can cover thick mattresses that defeat a 6 to 18 inch pocket.
Machine washable models earned credit for practical use, while spot clean and hand wash models were marked down. Expansion time also mattered, because foam needing 48 to 72 hours delays first use.
What firmness should a back sleeper choose?
Most back sleepers do best with medium to medium soft.
That range keeps hips from sinking too low while easing pressure under the lower back.
Firmness is about how the topper and mattress work together, not the label alone.
A soft top on a firm mattress can feel balanced.
The same soft top on a soft mattress can feel too plush.
Start with your current mattress as the base and add only the amount of give you are missing.
Medium foam for support
Medium firmness foam, such as the MASVIS dual layer, suits many back sleepers. It supports the spine without feeling rigid.
Soft pillow top for cushion
Soft fiber tops, such as COONP and HYLEORY, suit firmer mattresses. They add give without the deep sink of foam.
Plush for very firm beds
Plush options, such as Niagara, work best when your mattress feels hard. If your mattress already sags, plush can make support worse.
Should back sleepers pick memory foam or fiber fill?
Choose foam if you want contouring and pressure relief. Gel foam adds breathability compared with standard memory foam.
Choose fiber if you want a softer, cooler and more washable surface. Fiber tops also tend to feel less sticky in summer heat.
If you also sleep on your side, compare our best mattress topper for side sleepers guide, since side sleepers often need more shoulder and hip give.
When foam layering helps or hurts
Foam helps most when your mattress feels too firm. A 3 to 4 inch gel foam layer can contour under the lower back while keeping the surface flatter than a plush fiber pad.
Foam can hurt when your mattress already sags or when you sleep hot. Thick foam on a soft mattress can let hips sink lower and trap heat.
In that case, a thin fiber top like BEDLORE may be safer than another foam slab.
How do cooling fabrics help hot back sleepers?
Cooling fabrics use bamboo viscose, rayon from bamboo or cooling fibers to move heat and moisture away from the skin. They do not actively cool the bed, but they can feel less warm than polyester.
Bamboo viscose and rayon
HYLEORY, Niagara and BEDLORE use bamboo derived fabrics. Those fibers tend to feel smooth and absorb moisture.
Gel foam and cooling fiber
DOWNCOOL, WhatsBedding and MASVIS add gel foam or cooling fiber layers. Gel can feel cooler at first touch, but foam still holds some heat.
Cotton tops
COONP uses a cotton top for breathability. Cotton suits readers who prefer a natural feel over synthetic cooling claims.
What pocket depth and size should you measure?
Measure your mattress depth before you order. Then add the height of any protector or pad you use below the topper.
Deep pockets here range from 6 to 21 inches. A pocket that is too shallow will ride up, while a pocket that is too deep can bunch at the corners.
All picks here are queen size. If you need another size, check the same brand for that size.
For queen side sleepers, see best queen mattress topper for side sleepers. For king beds, see best king mattress topper for side sleepers.
Sheet fit after you add height
Extra thickness changes how your fitted sheet sits. A 5 inch foam topper adds far more height than a 2 inch fiber pad, so check whether current sheets still reach the bottom corners.
Straps and zippers change fit differently. WhatsBedding uses four elastic straps, while SINWEEK and MASVIS use zippers.
Still test the full stack with sheets, because loose sheets can feel uneven under your back.
How do you set up and care for a topper?
Unpack the topper and shake it out. Let foam expand flat for 24 to 72 hours, depending on the model.
Fiber tops often regain loft faster with a short tumble dry on low. Follow the care label, because some are machine washable and some are spot clean or hand wash only.
Secure the pocket or straps, then add sheets over the top. Wash on the schedule stated for its fabric to keep it fresh.
Airing out foam before first use
Foam toppers arrive compressed, so airing time is part of setup. SINWEEK and MASVIS list 48 to 72 hours, while WhatsBedding lists about 24 hours after patting flat.
Use a well ventilated room and lay foam flat.
Temperature can affect expansion in cooler rooms. SINWEEK notes that a temperature near 78 degrees Fahrenheit can shorten the wait.
Do not fit sheets while foam is still thin and uneven, because a fully expanded layer sits flatter.
Which topper should you buy for back sleepers?
Pick COONP if you want a soft cotton pillow top with a deep pocket.
Pick HYLEORY if heat is your main concern and you want bamboo viscose.
Both suit readers who want a fiber feel rather than a thick foam slab.
Pick DOWNCOOL or WhatsBedding if you want thick gel foam support.
DOWNCOOL adds the most height at 5 inches, while WhatsBedding adds 4 inches with straps.
Pick MASVIS if you want to adjust feel with two layers.
You can use the gel foam layer, the pillow top pad, or both, depending on how much cushion your bed needs.
Pick SINWEEK if a removable washable cover matters most.
That design makes cleaning easier because you can wash the cover without handling the foam itself.
Pick Niagara or SameBed if you want a plush fiber surface and do not mind extra softness.
Pick BEDLORE if you want a thinner 2 inch pillow top that adds less height.
Before you choose, measure your mattress depth and check the pocket range or strap fit.
Also check care rules, since some models are machine washable and others need hand wash or spot clean only.
For other positions, compare the best mattress topper for stomach sleepers and our best short queen gel mattress topper guides.
Our top 3 picks at a glance
-
1
-
2
Best for hot sleepers who sleep on their backsHYLEORY Queen Size Mattress Topper Viscose Made
9.7/10 our score
See it on Amazon -
3
Best for thick 5 inch cooling foamDOWNCOOL 5 Inch Cooling Queen Mattress Topper
9.6/10 our score
See it on Amazon
Frequently asked questions
Are mattress toppers good for back sleepers?
Yes, a topper can soften a firm mattress and spread pressure under the lower back and hips. Back sleepers often do best with a medium or medium soft surface that keeps the spine in a neutral line.
If pain continues, talk with a doctor.
Should back sleepers choose foam or fiber fill?
Foam contours to the body and can relieve pressure, while fiber fill feels softer and more breathable. Many back sleepers like gel foam for support or a pillow top for a softer surface.
Your current mattress firmness should guide the choice.
How thick should a topper be for back pain?
A 2 to 4 inch topper adds cushion without raising the bed too much. Thicker options near 5 inches suit very firm mattresses but can make sheets and guards harder to fit.
Measure your mattress plus topper before you buy.
Can you put a topper on a memory foam mattress?
Yes, many people add a fiber pillow top over memory foam to add breathability and softness. Check total height and pocket depth first.
Our guide on a topper for memory foam mattresses explains the fit checks in detail.
Do toppers help with back pain?
A topper may help relieve pressure and improve comfort for some people with back pain. It does not treat a medical condition.
People with ongoing pain should get medical advice and not rely on bedding alone.
About this guide: Our look at mattress toppers for back sleepers draws on maker specs, materials and what owners report. See how we research.

